عربة التسوق

المنتج الكمية السعر المجموع الفرعي
المجموع الفرعي لعربة التسوق
Americas

Asia Pacific

Europe

Middle East and Africa

Savi Go (WG100/B / WG101/B): How to a Pair Headset to the USB Adapter

معرّف المقال :
000001300

How do I pair a Savi Go (WG100/B, WG101/B) headset to the USB adapter?

The headset and USB adapter are supplied paired to each other. However, if you lose pairing or wish to use a replacement headset with your existing USB adapter, you have to pair the devices before use. To Pair a Headset to the USB Adapter:
  1. Ensure your headset is fully charged.
  2. Power the headset off by pressing and holding the call control button until the headset indicator light glows red.
  3. Place the headset in pairing mode pressing and holding the call control button (see below) until the indicator light flashes red and blue.


     
  4. Place the USB adapter in pairing mode by pressing and holding the pairing button on the adapter until the indicator light flashes red and blue. Note: Take caution when pairing the USB adapter. Rather than pressing down on the pairing button, pinch it to avoid damage to the USB adapter or USB port.

  5. When the pairing light on the USB adapter glows solid blue, the pairing process is complete and the headset is ready to use.

No Results Found

التصفية بحسب