Support Knowledge Base

Support
Online Resources
Warranty & Replacements
Search Knowledge Base

M25/M55: How to Pair

How do I pair my M25/M55 headset to my cell phone or other device?

Procedure

First time pairing

The M25 and M55 feature QuickPair technology, which means that the first time you turn the headset on, it automatically goes into pairing (discoverable) mode. To pair the headset:

Image of the first time pairing process for the M25/M55

  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on. The light on the headset should start flashing red-white. If it doesn't, refer to the "Subsequent pairing" instructions below. Set the headset aside.
  3. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. The M25 appears as "PLT_M25" in your list of devices, and the M55 appears as "PLT_M55."
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.

Subsequent pairing

If you need to pair the headset to your phone again - or to another device - you can do so by performing the following:

Image of the pairing process for the M25/M55

  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on.
  3. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing red-white. Release the button and set the headset aside.
  4. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. The M25 appears as "PLT_M25" in your list of devices, and the M55 appears as "PLT_M55."
  5. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.