- Pomoc techniczna
- Gwarancja i rejestracja
Voyager 510S/510SL/510SL+: How to Switch Lines
Identyfikator artykułu :
How can I switch lines on the Voyager 510 S (office to cell to computer)?
Cell phone and Home/Office Phone: While on a call on your desk phone, you can dial a number on the cell phone and then press the talk button on the headset to switch to the cell phone. You should now be hearing the audio from the cell phone. If you press the Talk button again, you will hang up the cell phone call. Pressing the Talk button once more will switch back to the desktop phone. If you are on a call on your desk phone and the cell phone rings, you can press the talk button on the headset twice to switch to the cell phone. As before, if you press the talk button again, you will hang up the cell phone call. Pressing the talk button once more will switch back to the desktop phone. The original call should be still in progress. Cell Phone and VoIP/Computer: After connecting your Voyager 510 base to your phone, you should be able to use the headset with your desktop phone. Next you should pair the headset with your PC by putting the headset in discovery mode and going to My Bluetooth Places on your PC "search for nearby devices". When the "PLT 510" is found, right-click on its icon and select "Pair Device". Enter the four-digit pass code and click OK. Then right-click again and select "Connect Headset". You will hear the tone in the headset similar to a ringing. Press the talk button on the headset to answer. You are now paired and connected to the PC. While you are listening to audio from the PC, you can switch to the phone by pressing the talk button twice. To listen to the PC audio, press the talk button. Go to My Bluetooth Places and right-click on the "PLT 510" icon. Select "Connect Headset". You will hear the tone in the headset similar to a ringing. Press the talk button on the headset to answer. You can then repeat the steps to go back and forth between the two devices.