Support Knowledge Base

Support
Online Resources
Warranty & Replacements
Search Knowledge Base

M20/M50: How to Pair

How do I pair my M20 headset with my mobile phone or other device?

Procedure

 

First time pairing:

Image of M20 Quick Pair Process

The M20 features QuickPair technology, which means that the first time you turn the headset on, it automatically goes into pairing (discoverable) mode. To pair the headset,

  1. Turn on your mobile device’s Bluetooth feature.
  2. Turn the headset on. The light on the headset should start flashing an alternating red-blue. If it doesn't, refer to the "Subsequent pairing" instructions below. Set the headset aside.
  3. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The Mobile phone should find the headset. The M20 appears as "PLT_M20" in your list of devices, and the M50 appears as "PLT_M50."
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.

Subsequent pairing:

Image of M20 Subsequent Pairing

If you need to pair the headset to your mobile phone again - or to another device - you can do so by performing the following:

  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on.
  3. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the button and set the headset aside.
  4. On your mobile phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. The M20 appears as "PLT_M20" in your list of devices, and the M50 appears as "PLT_M50."
  5. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your mobile phone does not prompt you for a passkey, because many phones do not.