• Products
  • Solutions
  • Support
  • Partners

Support Knowledge Base

Support
Online Resources
Warranty & Replacements
Search Knowledge Base

Voyager 835: How to Use

How do I use the Voyager 835?

Procedure

To:Take This Action:Indicator Light Response:Audible Response:
Turn on headsetPress and hold the call control button for 2 secondsBlue FlashFour rising tones
Turn off headsetPress and hold the call control button for 4 secondsFlashed red, then turns offFour falling tones
Answer/end callTap the call control buttonThree blue flashes (repeating) while phone is ringing. Blue flash every 2 seconds while on a call. No indicator light when ending a callThree brief repeating low tine while ringing, then brief low tone at beginning and end of call.
Reject a callPress and hold the call control button for 2 secondsNoneLow long tone
Missed callBriefly press any button to cancel the indicator lightThree purple flashes (repeating) for 5 minutes or until call canceledNone
Make a callEnter the number on your phone and press sendBlue flash every 2 seconds until call is endedBrief tones then ringing
Check battery powerPress and hold both the call control and volume down buttons for about 2 seconds.  The Indicator light flashes red to show the charge level.1 red flash = more that 2/3 full
2 red flashes = 1/3 - 2/3 full
3 red flashes = Less than 1/3 full
None
Adjust the volumeTap the up or down volume buttonBlue flashBrief low tone (2 low tones when volume limit is reached)
Voice dialPress and hold the call control button for 2 secondsBlue flash repeating every 2 secondsNone
Redial last numberTap the call control button twiceBlue flash repeating every 2 secondsTwo brief low tones
Transfer a call from headset to phone, or from phone to headsetWhile the call is in progress, press and hold the call control button for 2 secondsNoneBrief low tone