Support Knowledge Base

Support
Online Resources
Warranty & Replacements
Search Knowledge Base

M100: Pairing Instructions

How do I pair my M100 with my phone?

Procedure

Image

First time pairing instructions for the M100:

The M100 headset features QuickPair technology, which means that the first time you turn the headset on, it automatically goes into pairing (discoverable) mode.

  1. Turn the headset on. The light on the headset should start flashing an alternating red-blue. If it doesn't, refer to the "Subsequent pairing instructions," below. Set the headset aside.
  2. On your cell phone/audio device, go to the Bluetooth menu and search for (or add) a device.
  3. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.

Subsequent pairing instructions for the M100:

If you need to pair the M100 to your phone/device again - or to a new device - you can pair the headset by performing the following:

  1. Start with the headset powered on.
  2. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue.
  3. Release the button and set the headset aside.
  4. On your cell phone, go to the Bluetooth menu and search for (or add) a device.
  5. The cell phone should find the headset. The headset will appear as "1xxPlantronics" in your list of devices.
  6. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.