• Products
  • Solutions
  • Support
  • Partners

Support Knowledge Base

Support
Online Resources
Warranty & Replacements
Search Knowledge Base

Voyager Edge: How to Pair

This procedure explains how to pair your Voyager Legend headset with your phone or other Bluetooth device.

Procedure

First Time Pairing: 
  1. Wearing your headset, power it on. You hear “welcome” in all the supported languages and then "pairing" in the default language. The headset LED flashes red and blue.
  2. Activate Bluetooth® on your phone and set it to search for new devices.
    • iPhone Settings Bluetooth On
    • Android™  BluetoothOn Scan for devices
  3. Select “PLT_Edge.” If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you'll hear “pairing successful."
To Pair to Another Phone/Device:

After pairing your headset to your phone, you may want to pair another phone. To do so:
  1. Power on your headset.
  2. Choose one of the two options below:
    • Tap the Voice button and say "Pair mode"
    • Press and hold the Call button until you hear "pairing"
  3. Activate Bluetooth on your phone and set it to search for new devices.
  4. Select “PLT_Edge.”
  5. If necessary, enter four zeros (0000) for the passcode or accept the connection.
  6. Once successfully paired, you hear “pairing successful” and the headset indicator lights stop flashing.
NOTE: If your phone supports Near Field Communication (NFC) and want to pair this way, click here.