Explorer 240/395: Headset Controls and Indicators

Article ID : 000006037
To: Action: Indicator Light Response: Audible Response:
Turn the headset on Slide the Power Switch to the "On" position. Short blue flash Four rising tones
Turn the headset off Slide the Power Switch to the "Off" position. Long red flash, then turns off Four descending tones
Answer/end a call Tap the Call Control button. None Brief low tone at the beginning or end of the call.
Reject an incoming call Press and hold the Call Control button until you hear a low tone. None Low ton
Cancel the missed call indicator Briefly press any button to cancel the indicator light. Two simultaneous red/blue flashes, a pause, then two more red/blue flashes (repeating for 5 minutes or until cancelled). None
Make a call Enter the number on your phone and press send. Blue flash every 2 seconds until the call is ended. Ringing
Check battery level Simultaneously press and hold both the Call Control and Volume buttons for about 2 seconds. Red flashes indicate battery level:
1 flash = More than 2/3 full
2 flashes = 1/3 - 2/3 full
3 flahes = Less than 1/3 full
None when checking battery level; however, there is a low battery tone indication: 3 tones when under 5 minutes talk time remains.
Adjust the volume (during call) Tap the Volume button to increase through 4 levels; tap at top level to return to lowest volume setting. Single blue flash for every volume level change. Low tone at every volume level change. (Two tones at maximum volume level.
Voice dial Press and hold the Call Control button until you hear a tone. None Single low tone; phone may prompt with "Name please" or tones.
Redial last number Tap the Call Control button twice. None Two brief low tones
Transfer a call from headset to phone, or from phone to headset While the call is in progress, press and hold the Call Control button until you hear a tone. None Long low tone when moving to phone; short low tone when moving to headset.

Search by Keyword or Article ID