Support Knowledge Base

Support
Search Knowledge Base

APD-80 (Grandstream EHS Cable): How to Install

This procedure explains how to install the APD-80 EHS cable, which is compatible with the Grandstream GXP 2124

Procedure

Special Requirements

  • Phones require firmware 1.0.4.23 or higher
  • Select the APD-80 EHS by going to Menu > Config > Headset Type > Plantronics EHS
  • Use a Part Number 85638-01 adapter (sold separately through our distributors) to extend the ADP-80 audio input to reach the headset jack on the phone.

To Install the EHS Cable

  1. On your base, set your compatibility switch and speaking and listening volumes to the following:
     
    Setting CS500 Series/Savi 700 Series
    Compatibility A
    Speaking Volume 2
    Listening Volume 3
      Image of Settings
  2. Connect your EHS cable to your phone as follows:
     
    Image of the APD-80 Setup

Sign up to receive news and exclusive offers from Plantronics