CS500 Series: How to Subscribe (Pair) a Headset to the Base (Video)
The headset and base unit are subscribed to each other right out of the box. If you need to use a replacement headset with the base, you have to subscribe, or pair, it to the base.
There are two ways to subscribe your headset to the base: automatic secure subscription, and manual (also called over-the-air) subscription.
Automatic Secure Subscription
Click on the image above to see a video on how to automatically subscribe a headset to the CS500 series base.To automatically subscribe a headset to the base:
Simply dock your headset in the base. The power/subscription light (the white light on the base) flashes during the subscription process and glows solid when the headset pairs successfully.
Note: Only the last paired headset will work, so you will have to repeat this process whenever you need to use a different headset with the system.
Click on the image above to see a video on how to manually subscribe a headset to the CS500 series base.To manually subscribe a headset to the base:
- Start with the base in idle mode, and the headset undocked.
- Press and hold the subscription button on the base until the power/subscription indicator light flashes.
- Push the multifunction toggle in the volume (+) position until the headset's indicator light turns on solid.
- When the headset's indicator light turns solid and the base's power/subscription indicator light stops flashing, the subscription is complete.