Support Knowledge Base

Support
Search Knowledge Base

Marque M155/Marque 2 M165: How to Pair

How do I pair my M155/M165 headset with my cell phone or other device?

Procedure

First time pairing:

The M155 headsets feature QuickPair technology, which means that the first time you turn the headset on, it automatically goes into pairing (discoverable) mode. To pair the headset,

M155 QuickPair Process

  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on. The light on the headset should start flashing red-white. If it doesn't, refer to the "Subsequent pairing" instructions below. Set the headset aside.
  3. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. It will appear as "PLT_M155" or "PLT_M165" in your list of devices.
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Many phones do not prompt for a passkey.

Subsequent pairing:

If you need to pair the headset to your phone again - or to another device - you can do so by performing the following:

M155 Standard Pairing Process

  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on.
  3. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing red-white. Release the button and set the headset aside.
  4. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. It will appear as "PLT_M155" or "PLT_M165" in your list of devices.
  5. If prompted for a passkey, enter 0000 (four zeros). Note: Many phones do not prompt for a passkey.