Support Knowledge Base

Support
Search Knowledge Base

Savi Office: How to Set the Default Line to PC or Desk Phone

The following instructions pertain to models WO100, WO200, WO101, WO201, WO300, and WO350

You can set the default link from the Savi base or with the PerSono Suite software. The following section provides instructions for each.

Procedure

To set the default link with PerSono Suite software:

  1. Ensure your Savi Office is connected to the USB port and both LEDs on top off the base are off.
  2. Open the PerSono Suite window.
  3. Click Settings, and then click Base
  4. From the Default Line drop-down list, select the mode you want.
  5. Click the Apply button at the bottom of the window.

To set the default link from the Savi base:

While the system is in idle mode, press and hold either the PC talk button or the desk phone talk button for three seconds to select that device as your default outbound line. The talk button indicator light flashes green for four seconds confirming the new setting.

Savi Office Base Talk Buttons

Sign up to receive news and exclusive offers from Plantronics