Support Knowledge Base

Support
Search Knowledge Base

M1100: How to Pair

How do I pair my Savor M1100 with my cell phone or other device?

Procedure

First time pairing:

Image of the M1100 QuickPair process

The Savor M1100 headset includes QuickPair technology, which means that the first time your turn the headset on, it automatically goes into pairing (or discoverable) mode.

  1. On your cell phone, make sure Bluetooth is turned on.
  2. Turn the headset on. The light on the headset should start flashing an alternating red-blue. If it doesn't, refer to Subsequent pairing instructions, below. Set the headset aside.
  3. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. The headset will appear as "PLT_M1100" in your list of devices.
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.

Subsequent pairing:

Image of the M1100 pairing process

If you need to pair the M1100 to your cell phone again, or to a second device, you can do so by performing the following:

  1. On your cell phone, make sure Bluetooth is turned on.
  2. Start with the headset powered on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the call control button and set the headset aside.
  3. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. It will appear as "PLT_M1100" in your list of devices.
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.