Support Knowledge Base

Support
Search Knowledge Base

Pulsar 590A: How to Pair

How do I pair my Pulsar 590a with its Bluetooth adapter and my cell phone or other device?

Procedure

To pair your Pulsar 590a to its Bluetooth adapter:

Pulsar 590a Pairing

  1. Start with the headset powered off. Press and hold the call control button while powering the headset on. Once the light on the headset starts flashing an alternating red-blue, release the buttons and set the headset aside.
  2. With the adapter powered ON, press and hold the pairing/connect button for 7-10 seconds, until the light on the adaptor starts flashing and alternating red-blue. The headset and adaptor lights will flash blue once they have paired successfully.

To pair your Pulsar 590a to a cell phone or other Bluetooth device:

590e Pairing Process

  1. Turn on your device’s Bluetooth feature.
  2. Start with the headset powered off. Press and hold the call control button while powering the headset on. Once the light on the headset starts flashing an alternating red-blue, release the buttons and set the headset aside.
  3. On your cell phone/device, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset, which will appear as "590Plantronics" in your list of devices.
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.

Sign up to receive news and exclusive offers from Plantronics