عربة التسوق

المنتج الكمية السعر المجموع الفرعي
المجموع الفرعي لعربة التسوق

[Video] How to Handle Calls with the CS50/CS55/CS60/CS70/CS351/CS361

معرّف المقال :
000001475

The following article explains how to make and answer calls using your CS50/CS55/CS60/CS70/CS351/CS361 with:
  1. An HL10 lifter
  2. A handset jack without an HL10 lifter
  3. An EHS cable
  4. A dedicated headset jack without an EHS cable

Making a Call Using the Handset Lifter

Click on the image above to see a video on how to make a call using the handset lifter.


To make a call:
  1. Press the call control button to raise the handset lifter.
  2. Use the telephone keypad to dial the number.
To answer a call:
  1. Remove the headset from the base.
  2. Press the call control button to raise the handset lifter and answer the call.
To end a call, press the call control button to lower the handset lifter (the phone will hang up).


Making a Call Without a Handset Lifter


Click on the image above to see a video on how to make a call when connected to the phone's handset jack and without using a handset lifter.

To make a call:
  1. Take your handset off the hook.  A dial tone should sound through the handset.
  2. Press the call control button on the headset.  
  3. Dial using the telephone keypad.
To answer a call:
  1. Take the handset off the hook.
  2. Press the call control button on the headset to answer a call.
To end a call, press the call control button on the headset, then hang up the headset.
  Making a Call Using an EHS Cable



Click on the image above to see a video on how to make a call using an EHS cable.

To make a call:
  1. Press the call control button on the headset. You should hear a dial tone.
  2. Use the telephone keypad to dial a number.
To answer a call:
  1. Remove the headset from the base.
  2. Press the call control button to answer the call.
To end a call, press the call control button.


Making a Call Without an EHS Cable



Click on the image above to see a video on how to make a call when connected to a dedicated headset jack and without an EHS cable.

To make a call:
  1. Remove the headset from the base.
  2. Press the call control button on the headset.
  3. Press the headset button on the phone.
  4. Use the telephone keypad to dial a number.
To answer a call:
  1. Remove the headset from the base.
  2. Press the call control button on the headset.
  3. Press the headset button on the phone.
​To end a call:
  1. Press the call control button on the headset.
  2. Press the headset button on the phone.
 

< Previous 10 | Next 10 >()

التصفية بحسب