Καλάθι αγορών

Προϊόν Ποσότητα Τιμή Υποσύνολο
Υποσύνολο καλαθιού
Americas

Asia Pacific

Europe

Middle East and Africa

M1100 Voice Alerts

Αναγνωριστικό άρθρου :
000006081
 
What You'll Hear When You'll Hear It
Power On After pressing the Power button for 2 seconds
Power Off After pressing the Power button for 2 seconds
Talk Time: [x] hours After powering the headset on and after ending a call. The hours range from "6 hours" to "less than 2 hours."
Battery Low When you have under 30 minutes left before the battery must be recharged
Recharge Headset When you have approximately 10 minutes left before the battery must be recharged
Connected After turning the headset on or reconnecting a dropped Bluetooth signal
Phone 1 Connected After powering the headset to “on” or reconnecting a dropped Bluetooth connection
Phone 2 Connected After pairing a second phone using multipoint feature
Pairing While the headset is in pairing/discoverable mode
Pairing Successful After the phone paired successfully to the headset
Pairing Incomplete, Restart Headset After the phone failed to pair with the headset
Volume Maximum When you reached the highest volume level after pressing the volume up (+) button
Mute On After pressing the volume up (+) and volume down (-) buttons at the same time during a call
Mute Off After pressing the volume up (+) and volume down (-) buttons at the same time while on mute during a call
Lost Connection When the phone loses the Bluetooth connection with the headset
Cancelled After saying "cancel" to stop a voice command
Incoming call. You can say answer or ignore. When you receive an incoming call
"Your phone is connected"
or "No phone is connected"
When you check you connection status with the Voice recognition button
  See Also M1100 Voice Commands

< Previous 10 | Next 10 >()

Φιλτράρισμα ανά