Plantronics + Polycom. Οι δύο επωνυμίες συνδυάζονται τώρα σε ένα λογότυπο

Καλάθι αγορών

Προϊόν Ποσότητα Τιμή Υποσύνολο
Υποσύνολο καλαθιού

APA-2/APA-20/APA-23 (EHS Cable): How to Install on an Alcatel Lucent IP Touch Phone

Αναγνωριστικό άρθρου :
000009066

This procedure explains how to install the APA-2/APA-20/APA-23 EHS cable, which is compatible with the following Alcatel Lucent phone models:
  • IP Touch 4028
  • IP Touch 4038
  • IP Touch 4068

Phone Requirements
The headset has to be enabled in the phone. To verify this:
  1. Go to Settings > Set > Plug into jack > Headset on the phone.
  2. Make sure the Headset checkbox on the main screen is unchecked. The phone then automatically detects the headset when it is plugged in.
To Install the EHS Cable
  1. On your base, set your compatibility switch and speaking and listening volumes to the following:
     
    Setting CS50/CS55/CS70/CS70N/ CS351N/CS361N
    Cable APA-2
    CS500 Series
    Cable APA-20 or APA-23
    Savi Office/700 Series
    Cable APA-20 or APA-23
    Compatibility 1 A A
    Speaking Volume B 2 2
    Listening Volume 2 3 3
      Image of Settings Image of Settings Image of Settings
  2. Connect your EHS cable to your phone as follows:
     
    Image

< Previous 10 | Next 10 >()

Φιλτράρισμα ανά