Plantronics + Polycom. Οι δύο επωνυμίες συνδυάζονται τώρα σε ένα λογότυπο

Καλάθι αγορών

Προϊόν Ποσότητα Τιμή Υποσύνολο
Υποσύνολο καλαθιού

CS50-USB/CS60-USB: How to Reset the System

Αναγνωριστικό άρθρου :

This procedure describes how to reset the system.

  1. Press in and hold the mute control (A) and the talk button (B) until the talk indicator light (C) on the headset starts blinking rapidly. Release both buttons.
  2. Press and hold the talk button (B) again. Wait for the talk indicator light to stop blinking, then release the button.
  3. Disconnect the CS50-USB/CS60-USB from your computer's USB port.
  4. If you are also using an AC power supply, disconnect it from the bottom of the base.
  5. Wait 5 seconds, then reconnect the AC power supply and USB cable. The system reset is complete.
  6. Test the headset to ensure it works properly.

< Previous 10 | Next 10 >()

Φιλτράρισμα ανά