Shopping Cart

Product Quantity Price Subtotal
Cart Subtotal

Choose your country or region

Americas
Asia Pacific
Europe
Middle East and Africa

How to pair a Bluetooth headset.

Article ID :
000009272

I don't know the model of my Plantronics Bluetooth headset. How can I pair it to my cell phone or other mobile device?

All current Plantronics Bluetooth headsets fall into one of three categories: headsets that have a single button for call control and power, headsets that have a sliding on/off switch, and headsets that have a on/off button. Instructions for each are provided below. Note that some legacy/obsolete headsets are exceptions to this rule. Those headsets are listed at the bottom of this article and are linked to their specific pairing instructions.
Headsets that have a sliding on/off/pairing switch

Examples:
User-added image
  1. To put your headset in pair mode, press and hold the power switch towards the Bluetooth icon
    until you hear "pairing" and the headset LEDs flash red and blue.
  2. Release the button and set the headset aside.
  3. Activate Bluetooth on your phone and set it to search for new devices. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not. 
 
 
Headsets that have a single button for call control and power

Examples:
Image of the Backbeat FIT 300 and its pairing button.
  1. Start with your headset powered off.
  2. Press and hold the call control/power button for 5 or 6 seconds until the light starts flashing an alternating red-blue (the Discovery 975 flashes an alternating red-white).
  3. Release the button and set the headset aside.
  4. Follow the pairing instructions for your cell phone or other Bluetooth device.
  5. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not. 
 
 
Headsets that have an on/off button

Examples:
Image of the Backbeat FIT's power-pairing button.
  1. Start with your headset powered off.
  2. Press and hold the power button for 5 or 6 seconds until the light starts flashing an alternating red-blue.
  3. Release the button and set the headset aside.
  4. Follow the pairing instructions for your cell phone or other Bluetooth device.
  5. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not. 
 
 
Headsets that have a sliding on/off switch

Examples:
Image of the Voyager Edge and its Call Control Button
  1. Start with your headset powered on.
  2. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white).
  3. Release the button and set the headset aside.
  4. Follow the pairing instructions for your cell phone or other Bluetooth device.
  5. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not. 
Exceptions: Legacy Products
 
 
No Results Found

Filter by

© 2019 Plantronics, Inc. All Rights Reserved.