Shopping Cart

Product Quantity Price Subtotal
Cart Subtotal
Americas

Asia Pacific

Europe

Middle East and Africa

Pulsar 590A: How to Pair

Article ID :
000001388

How do I pair my Pulsar 590a with its Bluetooth adapter and my cell phone or other device?

To pair your Pulsar 590a to its Bluetooth adapter:
  1. Start with the headset powered off. Press and hold the call control button while powering the headset on. Once the light on the headset starts flashing an alternating red-blue, release the buttons and set the headset aside.
  2. With the adapter powered ON, press and hold the pairing/connect button for 7-10 seconds, until the light on the adaptor starts flashing and alternating red-blue. The headset and adaptor lights will flash blue once they have paired successfully.
To pair your Pulsar 590a to a cell phone or other Bluetooth device:
  1. Turn on your device’s Bluetooth feature.
  2. Start with the headset powered off. Press and hold the call control button while powering the headset on. Once the light on the headset starts flashing an alternating red-blue, release the buttons and set the headset aside.
  3. On your cell phone/device, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset, which will appear as "590Plantronics" in your list of devices.
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.

< Previous 10 | Next 10 >()

Filter by